Skip to main content

Clarkson VPN Connection Instructions

To access some Clarkson IT resources while not on the Clarkson wired or eduroam wireless networks, you will need to install and connect to the Clarkson VPN.  If you think you need VPN access and have not previously requested it from the HelpDesk, please call (315)268-4357 or email the Helpdesk at helpdesk@clarkson.edu for assistance.

If you have not already installed the Clarkson VPN client on your device and are not using a Clarkson-owned Windows computer, please see https://bookstack.clarkson.edu/books/general-knowledge-base/page/clarkson-vpn-installation-instructions before proceeding.

Connecting on Windows 10 or 11

You can connect to the Clarkson VPN either before logging into your laptop or after.  If this is your first time logging into your laptop, you must connect before logging in.

Connect Before Login

  1. Press CTRL-ALT-DEL to bring up the Windows login screen
  2. SelectBelow the password box, select "LoginSign-in a different way"options"
  3. Click the FortiClient Iconicon
    Forticlient-sbl-icon.jpg
  4. Enter your username and password as usual
    sbl-login.png
  5. Respond to the Duo prompt on your device
  6. When your Windows login has completed, you will also be connected to the Clarkson VPN. You can confirm by hovering over the FortiClient icon in the taskbar
    sbl-connected.png

Connect After Login

  1. Click the FortiClient icon in your taskbar
  2. Select "Connect to VPN"
  3. Select Connect to "Clarkson VPN"
  4. Your default browser will open or open a new tab. If you do not already have a CAS login session, you will be prompted to login
  5. Once your login is complete, the FortiClient will complete your connection, then minimize itself. You can confirm you are connected by hovering over the FortiClient icon in the taskbar
  6. You can close the browser tab that FortiClient opened

Connecting on MacOS

  1. INSERT STEPS AND SCREENSHOTS HERE

Connecting on iOS Devices

  1. Launch the FortiClient app and tap the "VPN" tab at the bottom
    FortiClientVPNtab.jpg
  2. Confirm your "Connections" indicates "Clarkson VPN". If it does not, please see https://bookstack.clarkson.edu/books/general-knowledge-base/page/clarkson-vpn-installation-instructions before proceeding
  3. Tap the switch on "VPN"
    vpn-switch.jpg
  4. You will be switched to a browser to login with your usual Clarkson login
  5. After completing the login process, you will be returned to the FortiClient app and should see you are connected
    vpnconnected.jpg
  6. To disconnect, tap the VPN switch again to turn off.


Connecting on Android Devices

Back to top